Loading...
Angel Finger|
Building Act was partially revised on October 28, 2015
Installation of a hand protection equipment on the door has become mandatory |
||||||
|
Laws and regulations regarding hand protection equipment
|
Building Act
Article 52-2 [Interior architecture] ① The interior of buildings corresponding to the purpose and scale determined by the President shall be constructed with a structure and materials that do not interfere with fire prevention and do not cause problems in the safety of users. ② Standards for the structure and construction method of interior architecture shall be determined by Ordinance of the Ministry of Land, Infrastructure and Transport. ③The Mayor of Special Self-Governing Cities, Governor of Special Self-Governing Provinces, or the mayor/governor/head of Gus shall inspect whether the interior architecture has been properly installed and constructed in accordance with paragraphs 1 and 2. In this case, the building to be inspected and its project cycle shall be determined by the Building Ordinance. [This article was newly inserted on April 28, 2011] Article 111 [Penalty] Any person who falls under any of the following subparagraphs shall be punished by a fine not exceeding KR\ 50 million. [77 / Feb. 6, 2009.2.6, Jan. 14, 2014, May 28, 2014, Feb. 3, 2016] 6. Owners and constructors who have built interiors in violation of Article 52-2. Enforcement Decree Article 61-2 [Interior Architecture] the term "buildings corresponding to the purpose and scale prescribed by Presidential Decree" in Clause (1) of Article 52-2 means any of the following buildings: 1. Multi-functional architecture 2.Buildings pursuant to Article 3 of the Act on Sale of Building Units [This article was newly inserted on November 28, 2014] Enforcement Regulations Article 26-5 [Standards for the structure and construction method of interior architecture] ① The structural construction methods, etc. of indoor buildings pursuant to Article 52-2 of the Act shall comply with the following standards. [Revised in February 29, 2015] 6. A door stopper to prevent safety accidents such as collisions and jamming shall be used for protrusions in the interior. ② Details regarding the structure and construction method of interior architecture under Paragraph 1 shall be determined and publicly announced by the Minister of Land, Infrastructure and Transport. [This article was newly inserted on November 28, 2014] |
|||||
Features of Angel Finger|
Point 01
 Its modern and concise design is excellent for interior decoration, while the sheet paper finish using the same material as the existing door with ultra slim thinness of 6mm makes the door look natural like a single unit. |
Point 02
 It can be easily and conveniently installed on the existing door within 5 minutes, and can be easily repaired without having to remove it when repairing the door. |
Point 03
 Unlike its PVC counterparts, Angel Finger is made of aluminum body, thus being exceptionally durable. Installed by using a piece fixing method instead of taping, it can be used for a long time by preventing it from being retained or dropped out. |
How to install Angel Finger
01
While keeping the existing door closed, attach the body to the far end in the opposite direction of the door lock and fix it with a piece. (Align the bottom of the door carefully)
|
▶ |
02
After installing the body, keep the door open and fix the cover plate to the door frame with a piece.
|
▶ |
03
Gently slide the cover plate into the gap between the door and the body.
|
Construction Case of Angel Finger|
How it Works
|
 |
Before installation
|
▶ |
After installation
|
 |
| Safety accidents in the home | Features of Angel Finger |
|---|---|
| Components and operation principle of Salto |
Product composition of safety door locks |
|
Building Act was partially
revised on October 28, 2015 Installation of a hand protection equipment on the door has become mandatory |
|---|
|
Laws and regulations regarding hand protection equipment
Building Act Article 52-2 [Interior architecture] ① The interior of buildings corresponding to the purpose and scale determined by the President shall be constructed with a structure and materials that do not interfere with fire prevention and do not cause problems in the safety of users. ② Standards for the structure and construction method of interior architecture shall be determined by Ordinance of the Ministry of Land, Infrastructure and Transport. ③ The Mayor of Special Self-Governing Cities, Governor of Special Self-Governing Provinces, or the mayor/governor/head of Gus shall inspect whether the interior architecture has been properly installed and constructed in accordance with paragraphs 1 and 2. In this case, the building to be inspected and its project cycle shall be determined by the Building Ordinance. [This article was newly inserted on April 28, 2011] Article 111 [Penalty] Any person who falls under any of the following subparagraphs shall be punished by a fine not exceeding KR\ 50 million. [77 / Feb. 6, 2009.2.6, Jan. 14, 2014, May 28, 2014, Feb. 3, 2016] 6. Owners and constructors who have built interiors in violation of Article 52-2. Enforcement Decree Article 61-2 [Interior Architecture] the term "buildings corresponding to the purpose and scale prescribed by Presidential Decree" in Clause (1) of Article 52-2 means any of the following buildings: 1. Multi-functional architecture 2. Buildings pursuant to Article 3 of the Act on Sale of Building Units [This article was newly inserted on November 28, 2014] Enforcement Regulations Article 26-5 [Standards for the structure and construction method of interior architecture] ① The structural construction methods, etc. of indoor buildings pursuant to Article 52-2 of the Act shall comply with the following standards. [Revised in February 29, 2015] 6. A door stopper to prevent safety accidents such as collisions and jamming shall be used for protrusions in the interior. ② Details regarding the structure and construction method of interior architecture under Paragraph 1 shall be determined and publicly announced by the Minister of Land, Infrastructure and Transport. [This article was newly inserted on November 28, 2014] |
Point 01 |
|---|
|
Clean "Hidden Design"
Its modern and concise design is excellent for interior decoration, while the sheet paper finish using the same material as the existing door with ultra slim thinness of 6mm makes the door look natural like a single unit.
|
Point 02 |
|
Quick and easy installation
It can be easily and conveniently installed on the existing door within 5 minutes, and can be easily repaired without having to remove it when repairing the door.
|
Point 03 |
|
Flexible, durable and strong material
Unlike its PVC counterparts, Angel Finger is made of aluminum body, thus being exceptionally durable.
Installed by using a piece fixing method instead of taping, it can be used for a long time by preventing it from being retained or dropped out.
|
|
01
|
|---|
| While keeping the existing door closed, attach the body to the far end in the opposite direction of the door lock and fix it with a piece. (Align the bottom of the door carefully) |
|
02
|
| After installing the body, keep the door open and fix the cover plate to the door frame with a piece. |
|
03
|
| Gently slide the cover plate into the gap between the door and the body. |
|
How it Works
|
|---|
|
|
|
Before installation
|
|
After installation
|
|
|
