CUSTOMER CENTER

Guidance Video

> Customer Center > Guidance Video
Instructions to install Ball SS Handle Instruction to install the door handle for the front door Instruction to install the door handle for the bedroom Instruction to install the door handle of the bathroom Instruction to install cylinder type door lock for the wooden door

Instructions to install Ball SS Handle

Installation guidance
  1. step1
    01. Attached to the box
    1. Put the box in and tighten the screw or bolt.
      • Make sure that the skew of the latch bolt is directed toward the door.
      • Parameter of the screw is 3/16 ~ 24 (In case of the iron door)
  2. step2
    02. Separate the sticking plate
    1. The sticking plate is fixed in the body and mounted in the inside door handle, then the sticking plate is turned in the counterclockwise direction to separate it.
  3. step3
    03. Combine the outside door handle
    1. Take off the key. (When uninstalling the key, it's unnecessary to remove the key.)
    2. Put the four protruding corners into the four grooves of the square hole and then press.
    3. Place the pillar in the pore.
    4. Place the shaft of the door handle into the opening of the shaft.
  4. step4
    04. Tighten the sticking plate

    Put the plastic bushing and sticking plate inside the door and tighten it with a screw.

    After tightening the screw, check whether the deadlock is working well and check the operation of the latchbolt with the handle.

  5. step5
    05. Fix the inside door handle.
    1. Put the four protruding joints into 4 grooves of the square hole and then press.
    2. Install the shaft of the door handle in the shaft hole, then use the fastener to turn the thread to the right and tighten it.
  6. step6
    06. Fix the strike plate

    After installing the strike box, hold the strike plate and tighten the screws (bolts) with screwdrivers.